T+A HA 200 Headphone Amplifier
6900,00 €
The T+A first headphone amplifier is a new and ground-breaking development in which the analogue amplifier section, the converter section and also the case mechanics operate to perfection. The analogue section of the HA 200 is based on the unique HV technology. Its high-performance output stages operate in Class-A mode with a high idle current, and are effortlessly capable of driving even the most difficult of headphones.
Overview
The impedance of the three headphone outputs can even be matched to the headphones in use and the individual sound ideas. A cross-feed function for creating a sound stage image positioned in front of the head is available on request. The high-quality mains sections – one digital, one analogue with two separate toroidal transformers- provide very generous reserves of power. The digital section is fitted with the proprietary T+A True 1-Bit digital / analogue converter, which provides an incredible DSD 1024 for Bitstream, and the T+A quadruple converter with 32 Bit / 768 kHz for PCM. Like all current T+A DACs the new HA 200 also features a sophisticated and completely separate decoder architecture for DSD and PCM, ensuring that all digital formats are decoded to the finest standards. The design and materials of the case harmonies perfectly with the unique electronics. The HA 200 is significantly larger and heavier than other headphone amplifiers, but this is not surprising given the more than 2300 components and the sophisticated HV technology. All the case components are produced from non-magnetic aluminium, and the front panel is machined from solid plate material – just like the HV series. Accurate QPPM metering instruments and a large screen supply important system information, and provide an accurate indication of operating conditions. The FM8 IR remote control controls all functions of the HA 200. We have designed the HA 200 in every respect with no hint of compromise and without regard to cost, for we had only one goal in mind: musical reproduction to the very highest standard of perfection.
Technology
Our intention in developing the HA 200 was to build a headphone amplifier with the finest sound quality available anywhere in the world, and suitable for all kinds of dynamic and magnetostatic headphones. This means that the amplifier section would have an absolutely crucial part to play in the overall design. And that’s why we decided to adopt the principles of our HV series: pure analogue Class-A design with special MOS-FET transistors, no op-amps, no chips and a separate 100-Watt analogue mains section. Even the cross-feed function is generated by an analog filter circuit. The XLR and Cinch inputs take the same form as in the HV series, and the pre-amplifier is designed in such a way that it feeds the output stage in the optimum manner. Gas-tight encapsulated gold contact relays take over the volume control and adjustable loudness function and bridge the tone control completely (flat) on request, they are absolutely free of distortion and noise. Even after many years of operation these components are not subject to contact problems due to corrosion, dust or ageing effects. The relays are integrated directly into the circuit design, keeping the signal paths as short as possible.
| Analogue section | |
| Frequency response + 0 / − 3 dB: | D0,1 Hz – 200 kHz |
| Signal / noise ratio: | 110/114 dB |
| THD / Intermodulation: | < 0,001 % / < 0,001 % |
| Channel separation: | > 108 dB |
| Class A operation: | up to 700 mA |
| Loudness: | switchable, adjustable on the speaker efficiency |
| Sound control: | switchable, channel separated. Bass and treble -6 dB to + 8 dB |
| Headphone outputs: | 6.3 mm plug, 4.4 mm Pentaconn, XLR-4 pin Impedances: 8, 12, 18, 25, 40, 80 Ohms |
| Analogue inputs | |
| High level (RCA) / balanced (XLR): | 250 mVeff ... 4,5 Veff / 10 kOhms | 500 mVeff ... 9 Veff / 20 kOhms |
| Channel separation: | 110 dB |
| Digital inputs | |
| 1 x AES-EBU 32...192 kHz / 16-24 Bit S/P-DIF: 2 x Standard Coax, 2 x optical TOS-Link 32...192 kHz / 16-24 Bit, 1 x BNC 32...192 kHz / 16-24 Bit, 2 x USB DAC: Device-Mode 44,1 ... 768 kSps (PCM) and up to DSD1024*, supports asynchronous data transfer. *DSD 512 and DSD 1024 with Windows PC and appropriate driver installed or Linux PC with Kernel 4.4 or higher only. Supports DoP up to DSD 256 (0x05/0xFA Marker). 2 x HDMI IN, 1 x HDMI OUT with ARC (as an option) |
|
| Bluetooth: | A2DP (Audio), AVRCP 1.4 (Control) / aptX® HD , SBC, AAC |
| D/A converter section | |
| PCM: | Double-Differential-Quadruple-Converter with four 32-Bit Sigma-Delta D/A converter per channel 705,6 / 768 kSps conversion rate |
| DSD: | T+A-True-1Bit DSD D/A converter, up to DSD 1024 (49,2 MHz), native bitstream |
| Upsampling: | T+A signal-processor – synchronous upsampling with four selectable oversampling algorithms. FIR short, FIR long, Bezier/IIR, Bezier, NOS (non-oversampling)) |
| Analogue filter: | Phase-linear Bessel filter 3rd order, switchable with 60 or 120 kHz cut of frequency |
| Mains / Accessories / Dimensions | |
| Mains: | 100 – 120 V or 200 – 240 V, 50 – 60 Hz, 100 Watts |
| Standby: | < 0,5 Watts |
| Dimensions (H × W× D): | 10 × 32 × 34 cm |
| Accessories: | Remotecontrol FM8, power cord, USB-cabel for charging RC, USB cabel 2.0 for DAC, RCA cabel |
T+A (Theory + Application) is a German audio brand known for reference-grade engineering, clean industrial design and an uncompromising approach to sound. T+A builds complete systems — from integrated amplifiers and power amplification to DACs, network players and loudspeakers — with a strong focus on low noise, precision and long-term reliability.
Hi-Fi Market is an authorised T+A dealer in Estonia, supplying genuine products with official manufacturer warranty and local support. We help you choose the right T+A direction for your room and listening habits — whether you want a one-brand system approach or you’re matching T+A electronics with carefully selected speakers and sources.
Visit our showroom near Tallinn (Tabasalu) to audition selected T+A components and discuss real-world setup considerations before you decide.
Build a Stereo System with T+A
T+A works especially well when you think in a complete chain: start with an integrated amplifier (or pre/power), add a network player and DAC as needed, then match stereo speakers for your room size and listening distance.
Explore compatible categories to build a balanced T+A-based system:
If you want a short, well-balanced shortlist, contact us — we’ll recommend combinations that fit your room, budget and upgrade path.
FREE DELIVERY ACROSS ESTONIA (For orders over €100)
Shipments within Estonia generally arrive at the destination specified by the buyer within 3-5 business days from the entry into force of the sales contract. The contract enters into force from the moment the amount due is received into the online store's bank account.
If you wish, you can also pick up the goods yourself. The address of the salon is Kallaste 7, Tabasalu.
WE DELIVER TO ALL COUNTRIES OF THE EUROPEAN UNION.
Please fill in all fields at the checkout and we will contact you regarding shipping costs. Please make payment only after confirming the shipping costs.
OWNER OF THE ONLINE STORE
The owner of the online store hifimarket.ee is Audio Sommelier OÜ (registration number 16891515), address Kallaste, 7, Tabasalu Keskus, Estonia 76901
