For Generations

We are a family company, managed by its proprietors. If we pose the question: why is T+A equipment so special? Then we find the answer in the following situation: we grant ourselves the freedom to implement our convictions; to focus on decades, rather than just the next quarter. It is precisely this independence of action which enables us to accomplish long-term goals. For example, we took three years to develop the first device in our HV Series, and it was perfect. Our company founder loves music and technology, believes in science and the laws of physics, and always aimed to push those limits as far as possible; every single T+A device incorporates those convictions. These values will continue to be our companions for generations to come. At the same time the principles of our family enterprise are also reflected in our support for the coming generation.

T+A HCSE 6.3 Headphone Cable

Price range: 120,00 € through 150,00 €
T+A offers a selection of three headphone cables with different plugs. One of them is equipped with the 6.35 mm barrel connection type. The “jack” is regarded as the most popular and frequent connector to date. However, this design is not symmetrical as the left and right channel are not separated. All contacts are hard gold-plated and made of high-purity brass. The HCSE 6.3 headphone cable is available in 3m and 5m lengths.
Select options This product has multiple variants. The options may be chosen on the product page

T+A HCSE 4.4 Headphone Cable

Price range: 120,00 € through 180,00 €
T+A offers a selection of three headphone cables with different plugs. HCSE 4.4 is equipped with a 4.4 mm Pentaconn connector. Its symmetrical wiring allows for a complete separation of the left and right channel. Severing the ground connection between both channels renders any adverse influences on sound quality which might arise in non-separated systems such as the standard jack plug all but impossible.
Select options This product has multiple variants. The options may be chosen on the product page

T+A HCSE XLR-4 Headphone Cable

Price range: 150,00 € through 180,00 €
T+A offers a selection of three headphone cables with different plugs. HCSE XLR-4 is equipped with a 4-pin XLR connector (manufactured by Neutrik). Its symmetrical wiring allows for a complete separation of the left and right channel. Severing the ground connection between both channels renders any adverse influences on sound quality which might arise in non-separated systems such as the standard jack plug all but impossible.
Select options This product has multiple variants. The options may be chosen on the product page

T+A AD 4.4 / 6.3 Headphone Adaptor

100,00 
The T+A AD 4.4 / 6.3 adapter cable is used to connect headphones with 6.3 mm jack plugs to the 4.4 mm Pentaconn output socket of a headphone amplifier. The approx. 25 cm long adapter cable is equipped with a symmetrically wired Pentaconn plug (manufactured by NDICS) on the amplifier side and has a high-quality 6.3 mm jack socket on the headphone side. As cable we use the balanced high-end cable of our Solitaire P headphones.

T+A HCSE 3.5 Headphone Cable 1.25m

100,00 
The connection cables for the Solitaire P-SE are available in different lengths and four different connector types. HCSE 3.5 is equipped with a 3.5 mm jack plug, which is currently the most commonly used connector for mobile devices. Jack plugs are not balanced because the ground of the left and right channels is connected. All contacts are hard gold plated.

T+A EP SP HP High-Precision Earpad

120,00 
The High Precision ear pads are closed and made of allergen-free synthetic leather and Alcantara. The T+A Solitaire P comes standard with this ear pad. It contributes greatly to a very balanced and neutral sound. Spatiality and localization are impressive.

T+A EP SP-SE Replacement Earpad

120,00 
The ear pads are closed and made of allergen-free artificial leather and special fabric. The Solitaire P-SE comes standard with this ear pad. It is precisely tailored to the geometry of the shell and contributes to the very balanced and lively sound image, the spatial imaging and localization are excellent. Sold separately, does not come in pairs.

T+A AD 4.4 / XLR-4 Headphone Adaptor

140,00 
The T+A AD 4.4 / XLR-4 adapter cable is used to connect headphones with XLR 4-pin plugs to the 4.4 mm Pentaconn output socket of a headphone amplifier. The approx. 25 cm long adapter cable is equipped with a symmetrically wired Pentaconn plug (manufactured by NDICS) on the amplifier side and has a likewise symmetrically wired XLR 4-pin socket from Neutrik on the headphone side. As a cable we use the balanced high-end cable of our Solitaire P headphones. This ensures the highest quality connection.

T+A HCP 6.3 Headphone Cable

Price range: 280,00 € through 330,00 €
T+A offers a selection of three different headphone cables. One of them is equipped with the 6.35 mm barrel connection type. The “jack” is regarded as the most popular and frequent connector to date. However, this design is not symmetrical as the left and right channel are not separated. The HCP 6.3 headphone cable is available in 3m and 5m lengths.
Select options This product has multiple variants. The options may be chosen on the product page

T+A HCP 4.4 Headphone Cable

Price range: 300,00 € through 350,00 €
T+A offers a selection of three different headphone cables. HCP 4.4 is equipped with a 4.4 mm Pentaconn connector. Its symmetrical wiring allows for a complete separation of the left and right channel. Severing the ground connection between both channels renders any adverse influences on sound quality which might arise in non-separated systems such as the standard jack plug all but impossible.
Select options This product has multiple variants. The options may be chosen on the product page

T+A HCP XLR-4 Headphone Cable

Price range: 300,00 € through 350,00 €
T+A offers a selection of three different headphone cables. HCP XLR-4 is equipped with a 4-pin XLR connector (manufactured by Neutrik). Its symmetrical wiring allows for a complete separation of the left and right channel. Severing the ground connection between both channels renders any adverse influences on sound quality which might arise in non-separated systems such as the standard jack plug all but impossible.
Select options This product has multiple variants. The options may be chosen on the product page

T+A Talis LS 300 Speaker Stand

995,00 
The Talis LS 300 speaker stand has been designed specifically for the Talis R 300. The bottom panel of the R 300 is screwed securely to the stand, ensuring that the combination is stable when erected.  The T+A LS 300 speaker stand is not sold in pairs.
Select options This product has multiple variants. The options may be chosen on the product page