T+A MP 2500 R Multi-Source SACD Player
The MP 2500 R is T+A’s newest and most sophisticated Multi Source Player and PCM/DSD DAC in the R Series. The MP 2500 R has the same overall design philosophy and technical facilities like the smaller MP 2000 R MK II player. Both have been developed to reproduce high-res audio files without any trace of compromise. Instead of a CD mechanism T+A have equipped the MP 2500 R with the SACD drive from T+A’s High-End SACD player MP 3100 HV which is a completely new development.
Select options
This product has multiple variants. The options may be chosen on the product page
T+A MP 3100 HV Multi-Source SACD Player
The MP 3100 HV is our latest and most sophisticated multi-media player. The basic design philosophy stems from the MP 3000 HV, but the MP 3100 HV is now capable of carrying out the full signal processing of DSD bitstream data in addition to processing PCM data to impeccable standards. This extensive development was necessitated by the machine’s new integral disc mechanism: an SACD drive which is a completely new development, featuring the very latest decoder, and capable of reading files at the highest possible quality.
Select options
This product has multiple variants. The options may be chosen on the product page
T+A P 3100 HV Preamplifier
The design and concept of the P 3100 HV is based on the P 3000 HV. Outwardly, the difference is only the type number. In terms of circuitry, however, the entire preamplifier section, and thus the most important part, has been further improved. So far, the input and output stages of the P 3000 HV have been coupled to the relay volume control with high-quality capacitors. In the P 3100 HV a new, very complex circuit board layout compensates for the temperature coefficients of the transistors and the operating points can be set exactly.
Select options
This product has multiple variants. The options may be chosen on the product page
T+A PA 2000 R Integrated Amplifier
Building neat, compact integrated amplifiers offering high output power and superb sound quality is an art at which T+A has no peer. As proof of this claim we present the PA 2000 Rintegrated amplifier. It is incredibly dynamic, powerful and incisive. There are two reasons behind these characteristics: the extremely linear output stages with very low negative feedback, which are a completely new development, and the new form of mains power supply employed.
Select options
This product has multiple variants. The options may be chosen on the product page
T+A PA 2500 R Integrated Amplifier
Twice as tall, higher output power and even more connection facilities – the T+A PA 2500 Rexceeds the specification of the PA 2000 R in many areas, but its character in terms of sound quality is in no way inferior to its smaller sibling. This by no means goes without saying, because very powerful amplifiers often forfeit the finer points of dynamics and detail tracery. Our PA 2500 R integrated amplifier circumvents this danger: its basic circuit is the same as that of the PA 2000 R, and even the circuit board layouts are identical.
Select options
This product has multiple variants. The options may be chosen on the product page
T+A PA 3100 HV Integrated Amplifier
The T+A PA-3100 HV is a further development of the PA-3000 HV and is identical in most modules. The immediately visible difference is two VU meters in the front, which display the output power per channel logarithmically in watts at 4 ohms. In addition, a new concept for the analogue converter part and the voltage supply was developed similar to the A-3000 HV, which allows the PS-3000 HV to be connected and the stability and performance of the entire voltage supply to be increased again.
Select options
This product has multiple variants. The options may be chosen on the product page
T+A PDT 3100 HV Reference CD/SACD Transport
The T+A PDT 3100 HV is a purist CD/SACD mechanism which does not feature supplementary integral digital sources or converters. It has been developed uniquely and exclusively for the uncompromising task of reading SACD and CD, and is fitted with a new decoder/drive mechanism which we have developed from the ground up. This mechanism reads and decodes CD and SACD without error and to the very highest standards of quality. The mechanical system is extremely refined.
Select options
This product has multiple variants. The options may be chosen on the product page
T+A Power Bar 2+3 Basic HD Power Conditioner
This distribution panel has two sockets for analogue and three sockets for digital devices. Sophisticated High-End systems may consist of a vast range of different components, and invariably consume very high currents. This places considerable demands on the method of distributing mains power to the individual machines in the system. T+A Power Bars are designed and equipped to suppress and effectively eliminate the various forms of interference.
T+A Power Bar 2+3 HD Power Conditioner
This distribution panel has two sockets for analogue and three sockets for digital devices and a massive bottom plate machined from solid aluminum. Sophisticated High-End systems may consist of a vast range of different components, and invariably consume very high currents. This places considerable demands on the method of distributing mains power to the individual machines in the system. T+A Power Bars are designed and equipped to suppress and effectively eliminate the various forms of interference.
T+A Power Bar 2+5 Basic HD Power Conditioner
This distribution panel has two sockets for analogue and five sockets for digital devices. The effect of mains leads and – especially – mains distribution panels is very considerable, and is often drastically underestimated. Very high currents can flow in a distribution panel, potentially generating powerful magnetic fields. For this reason T+A Power Bars are made of pure, high-quality aluminium throughout. The main case is produced using a sophisticated extrusion tool, is extremely rugged and rigid.
T+A Power Bar 2+5 HD Power Conditioner
This distribution panel has two sockets for analogue and five sockets for digital devices. The effect of mains leads and – especially – mains distribution panels is very considerable, and is often drastically underestimated. Very high currents can flow in a distribution panel, potentially generating powerful magnetic fields. For this reason T+A Power Bars are made of pure, high-quality aluminium throughout. The main case is produced using a sophisticated extrusion tool, is extremely rugged and rigid.
T+A PS 3000 HV Power Supply
The T+A PS 3000 HV is a supplementary mains unit which was developed specifically for the A 3000 HV power amplifier and the PA 3100 HV integrated amplifier. Both deliver more than 500 Watts of power into 4 Ohms, and at such a high level of sound quality and performance that simply increasing the output power – and with it the voltage – produces no significant improvement in sound.
Select options
This product has multiple variants. The options may be chosen on the product page
