Audio Physic Codex RQ Floorstanding Speakers (Pair)
15600,00 €
Audio Physic Codex RQ is a sophisticated 4-way floorstanding loudspeaker from the Reference Line, combining powerful low-frequency performance with exceptional placement flexibility. The latest generation introduces RECOTec diaphragm technology in the HHCT V tweeter, HHCM V SL midrange driver and 7-inch midwoofer, together with Q-SET bass adjustment for both the midwoofer and the concealed 11-inch internal woofer.
- 4-way Reference Line floorstanding loudspeaker
- RECOTec diaphragm technology in tweeter, midrange and midwoofer
- Fifth-generation HHCT V 39 mm tweeter
- Fifth-generation HHCM V SL 150 mm spiderless midrange driver
- 180 mm / 7-inch RECOTec midwoofer with Double Surround and Q-SET
- 280 mm / 11-inch internal aluminium-cone woofer with Q-SET
- 3-stage Q-SET bass adjustment for flexible room placement
- Frequency range: 28 Hz–40 kHz
- Sensitivity: 89 dB and nominal impedance: 4 ohms
- Recommended amplifier power: 40–250 W
- Sandwich cabinet with Ceramic Foam and Honeycomb internal structures
- Vibration-isolated VCT terminal with WBT nextgen® binding posts
- Standard finishes: Glass Black, Glass White and Glass Anthracite
Audio Physic Codex RQ Floorstanding Speakers
Audio Physic Codex RQ is the latest generation of the acclaimed Codex floorstanding loudspeaker and represents a substantial technological update to one of the most distinctive models in the Reference Line. Its 4-way architecture combines a slim front baffle with a powerful concealed internal woofer, allowing the Codex RQ to deliver deep and authoritative bass without the visual bulk normally associated with a loudspeaker of this performance level.
The new RQ generation introduces two major developments: Audio Physic’s RECOTec diaphragm technology and Q-SET room-adaptive bass control. Together, they improve resolution, transient precision and tonal naturalness while making the loudspeaker considerably easier to integrate into real listening rooms.
RECOTec Driver Technology
The tweeter, midrange driver and front-mounted midwoofer now use Audio Physic’s RECOTec diaphragm material. RECOTec consists of a carbon-fibre structure embedded in a high-purity polypropylene matrix, combining high rigidity with excellent internal damping.
The material is designed to respond quickly and precisely to musical signals while suppressing unwanted resonances. The result is greater transparency, finer low-level resolution and a natural tonal balance across a wide part of the audible spectrum.
Fifth-Generation HHCT V Tweeter
High frequencies are reproduced by the 39 mm HHCT V Hyper Holographic Cone Tweeter. This fifth-generation design uses the new RECOTec diaphragm to combine excellent transient response with low resonance and high internal damping.
The result is a refined and highly detailed treble presentation that preserves delicate overtones, spatial information and the natural air of a recording without exaggeration.
HHCM V SL Spiderless Midrange Driver
The 150 mm HHCM V SL midrange driver also uses RECOTec technology. Its special surround construction eliminates the conventional centering spider, creating a less obstructed airflow path behind the diaphragm and reducing compression effects.
This allows voices and instruments to be reproduced with exceptional openness, articulation and dynamic freedom, particularly through the critical midrange region.
7-Inch RECOTec Midwoofer
A 180 mm / 7-inch midwoofer is mounted on the front baffle and operates above approximately 100 Hz. It combines a RECOTec diaphragm with Audio Physic’s Double Surround construction and Q-SET technology.
The driver provides fast, controlled upper-bass reproduction and creates a seamless transition between the concealed low-frequency woofer and the dedicated midrange driver.
Concealed 11-Inch Internal Woofer
The deepest frequencies are reproduced by a powerful 280 mm / 11-inch long-throw aluminium-cone woofer installed inside the cabinet in its own optimally tuned chamber.
This internal woofer gives the Codex RQ the authority and extension of a much larger loudspeaker while allowing the external cabinet to retain its elegant proportions and narrow front profile.
Q-SET Bass Adjustment
Both the front-mounted midwoofer and the internal woofer use dual voice coils and are designed to work with Audio Physic’s Q-SET bass-adjustment system.
Rear-panel switches provide three levels of adjustment, allowing the low-frequency response to be tailored to the loudspeaker’s position in the room. This is especially useful when the Codex RQ is placed closer to a rear wall or corner, where room reinforcement would otherwise increase bass energy.
Q-SET performs this adjustment without significantly changing the impedance curve seen by the amplifier, allowing the loudspeaker to retain consistent electrical behaviour across the available settings.
Exceptional Placement Flexibility
The combination of the concealed internal woofer, dedicated low-frequency chamber and Q-SET system gives the Codex RQ unusual flexibility for a loudspeaker capable of reaching down to 28 Hz.
This makes it particularly attractive for high-performance systems in real living spaces where deep bass is required but ideal free-standing loudspeaker placement is not always possible.
Rigid Sandwich Cabinet Construction
The Codex RQ uses an extensively braced cabinet structure with open-cell Ceramic Foam elements and Audio Physic’s Sandwich Cabinet Construction. Ceramic Foam is exceptionally rigid while consisting largely of air, allowing it to reinforce the enclosure without significantly reducing the working volume available to the drivers.
Honeycomb Sandwich Board is also used to provide high rigidity with low mass and reduced susceptibility to structural resonance. A permanently elastic layer between cabinet sections further suppresses unwanted vibration and prevents the enclosure from contributing its own sonic character.
Mechanically Decoupled Drivers and Crossovers
The individual drivers are mechanically isolated from the cabinet and operate in dedicated internal chambers, reducing the transmission of micro-vibrations and minimising interactions through the internal air volume.
The crossover network is distributed across several sections and positioned close to the relevant drivers. Short signal paths and carefully selected components help preserve signal integrity throughout the loudspeaker.
Vibration Control Terminal
The rear connection panel is mechanically decoupled from the enclosure using Audio Physic’s Vibration Control Terminal concept. High-quality WBT nextgen® binding posts provide the electrical connection while reducing the influence of structural vibration on the signal path.
Single-wiring is standard. A bi-wiring / bi-amping terminal can be ordered as an option.
Contemporary Glass Finishes
The standard Codex RQ range is available in Glass Black, Glass White and Glass Anthracite. The high-mass glass panels are not purely decorative: they also contribute to the damping behaviour of the sandwich cabinet structure.
A special Glass Rosewood version is also listed by Audio Physic in selected markets on a price-on-request basis. Unlike previous Codex generations, this is a glass finish rather than conventional real-wood veneer.
Audio Physic Codex RQ combines deep, authoritative bass, advanced RECOTec driver technology and Q-SET room adaptation in an elegant 4-way Reference Line loudspeaker designed for both uncompromising sound quality and real-world placement flexibility.
Hi-Fi Market is an Audio Physic dealer in Estonia. Contact us or visit our showroom in Tabasalu near Tallinn for personal consultation, system matching and a listening appointment.

Specifications
| Product Type | 4-way floorstanding loudspeaker |
|---|---|
| Series | Audio Physic Reference Line |
| Tweeter | HHCT V, 39 mm / 1.5-inch RECOTec cone tweeter |
| Midrange | HHCM V SL, 150 mm / 5.9-inch RECOTec spiderless midrange driver |
| Midwoofer | 180 mm / 7-inch RECOTec driver with Double Surround and Q-SET |
| Internal Woofer | 280 mm / 11-inch aluminium-cone woofer with Q-SET |
| Bass Adjustment | 3-stage Q-SET adjustment for midwoofer and internal woofer |
| Frequency Range | 28 Hz–40 kHz |
| Sensitivity | 89 dB |
| Nominal Impedance | 4 ohms |
| Recommended Amplifier Power | 40–250 W |
| Connection Terminal | Vibration Control Terminal with WBT nextgen® binding posts |
| Wiring | Single-wiring standard; bi-wiring / bi-amping available on request |
| Cabinet Construction | Sandwich construction with Ceramic Foam bracing and Honeycomb Sandwich Board |
| Height | 1195 mm |
| Width | 202 mm |
| Depth | 370 mm |
| Required Space (W × D) | 360 × 500 mm |
| Weight | Approx. 44 kg per speaker in glass finish |
| Included Accessories | Black glass grille and spike set |
| Standard Finishes | Glass Black, Glass White, Glass Anthracite |
| Special Finish | Glass Rosewood – availability and price on request |
Build a Refined Stereo System with Audio Physic
Audio Physic is especially interesting for listeners who want loudspeakers with focus, openness and a believable three-dimensional soundstage. The brand’s design philosophy is based on careful cabinet construction, driver integration and acoustic control, helping the speakers disappear in the room and present music with scale, precision and natural flow. Audio Physic loudspeakers can work beautifully in well-matched stereo systems where amplifier quality, source components, cable choice and speaker placement are all treated as part of one complete system. This makes the brand suitable not only for replacing an old pair of speakers, but also for building a more coherent, long-term hi-fi system around a clear sonic goal.Recommended categories for building an Audio Physic-based system:- Speakers - Floorstanding Speakers - Bookshelf Speakers - Integrated Amplifiers - Power Amplifiers - Network Players & Streamers - Audio CablesTo discuss the right Audio Physic loudspeakers for your system, contact us. We can help you choose a suitable model and system setup based on your room, amplifier, listening habits and sound priorities.
FREE DELIVERY ACROSS ESTONIA (For orders over €100)
Shipments within Estonia generally arrive at the destination specified by the buyer within 3-5 business days from the entry into force of the sales contract. The contract enters into force from the moment the amount due is received into the online store's bank account.
If you wish, you can also pick up the goods yourself. The address of the salon is Kallaste 7, Tabasalu.
WE DELIVER TO ALL COUNTRIES OF THE EUROPEAN UNION.
Please fill in all fields at the checkout and we will contact you regarding shipping costs. Please make payment only after confirming the shipping costs.
OWNER OF THE ONLINE STORE
The owner of the online store hifimarket.ee is Audio Sommelier OÜ (registration number 16891515), address Kallaste, 7, Tabasalu Keskus, Estonia 76901
Related products
Monitor Audio Hyphn Floorstanding Speakers (Pair)
82500,00 €Monitor Audio Platinum 300 3G Floorstanding Speakers (Pair)
14000,00 €KEF Blade One Meta Floorstanding Speakers (Pair)
36750,00 €Dynaudio Focus 30 Wireless Floorstanding Speakers (Pair)
7500,00 €Dynaudio Evoke 50 Floorstanding Speakers (Pair)
4800,00 €Dynaudio Evoke 30 Floorstanding Speakers (Pair)
3500,00 €Dynaudio Contour 30i Floorstanding Speakers (Pair)
8000,00 €







