T+A PA 2500 R Integrated Amplifier
10500,00 €
Twice as tall, higher output power and even more connection facilities – the T+A PA 2500 Rexceeds the specification of the PA 2000 R in many areas, but its character in terms of sound quality is in no way inferior to its smaller sibling. This by no means goes without saying, because very powerful amplifiers often forfeit the finer points of dynamics and detail tracery. Our PA 2500 R integrated amplifier circumvents this danger: its basic circuit is the same as that of the PA 2000 R, and even the circuit board layouts are identical.
Overview
Twice as tall, with higher output power and with even more connection facilities the T+A PA 2500R integrated amplifier exceeds the specification of the T+A PA 2000R integrated amplifier.
Whilst the T+A PA 2500R integrated amplifiers basic circuit and circuit board layout is the same as that of the T+A PA 2000R there are other major differences. The heat sinks used in the T+A PA 2500R integrated amplifier are twice the size of those used in the T+A PA 2000R. There are also two of T+A`s new high performance mains power supply units used in the T+A PA 2500R with the result that it can deliver more than 260 watts of continuous power per channel into 4 Ohms loudspeakers. The amplifier is therefore effortlessly capable of controlling loudspeakers which are extremely critical in terms of phase and impedance.
Precision Gold contact relays are employed to switch loudspeakers, inputs and internal signal circuits with total precision and zero losses.
Separate tone controls are present for each channel (which can also be by-passed completely) gives the user full control of the performance required within any system. An optional audiophile phono preamplifier module for MM or MC can simply be plugged in.
The T+A PA 2500R maybe more powerful than the smaller T+A PA 2000R but it retains exactly the same dynamism and cultured sound. The T+A PA 2500R is fitted with three symmetrical XLR inputs, of which one can be configured as Surround Pass Through, four high quality single ended inputs (RCA), symmetrical (XLR) and asymmetrical (RCA) preamplifier output sockets, and two pairs of loudspeaker outputs with heavy duty terminals machined from ultra pure non magnetic Brass with Rhodium plated contact surfaces. A headphone socket is present on the front panel.
| Pre-amplifier stage | |
| Frequency response + 0 / − 3 dB: | 0,5 Hz – 300 kHz |
| Signal / noise ratio, unweighted / A-weighted: | 105 / 109 dB |
| Total harmonic distortion/Intermodulation: | < 0,001 % / < 0,001 % |
| Channel separation: | > 90 dB |
| Loudness: | Switchable, variable to suit loudspeaker efficiency |
| Tone controls, Bass, Treble: | Switchable, channel-separate, −6 … +8 dB, −6 … +8 dB |
| Nominal input sensitivity | |
| High level (RCA): | 4 × 250 mV … 4 Veff/20 kOhms |
| Balanced (XLR): | 3 × 500 mV … 8 Veff/5 kOhms |
| Phono-MM (optional*): *Phono module replaces one high-level input |
1 – 5 mV, 16 Capacitances |
| Phono-MC (optional*): *Phono module replaces one high-level input |
60 – 1000 µV, 16 Impedances |
| Outputs | |
| Headphone: | 50 Ohms |
| PRE out RCA: | Nom 1 Veff, Max 9,5 Veff, 75 Ohms |
| PRE out XLR: | Nom 1,45 Veff, Max 19,6 Veff, 75 Ohms |
| Output stage | |
| Nominal output per channel: | into 8 Ohms 140 Watts into 4 Ohms 280 Watts into 2 Ohms 560 Watts |
| Frequency response + 0/– 3 dB: | 1 Hz – 150 kHz |
| Slew rate: | 60 V/µs |
| Damping factor: | > 65 |
| Total harmonic distortion: | < 0,02 % |
| Reservoir capacity: | 120000 µF |
| Mains / Accessories / Dimensions | |
| Control interface: | R2-Link |
| Remote control: | SRC 1 |
| Mains connection: | 100 – 120 V or 200 – 240 V, 50 – 60 Hz, Max. 2000 Watt |
| Standby: | < 0,5 W |
| Additional features: | Trigger input +5V … 20V via adapter plug for remote power-on. Input 3 (symmetrical) or 5 (asymmetrical) can be configured as Surround Pass Through |
| Dimensions (H x W x D): | 16,5 × 46 × 40,5 cm |
| Weight: | 14,5 kg |
| Finishes: | Silver anodised aluminium (43), black anodised aluminium (42), brushed |
T+A Eesti (Theory + Application) on Saksamaa audio bränd, mis on tuntud referentsklassi inseneritöö, puhta industriaaldisaini ja kompromissitu helikäsitluse poolest. T+A ehitab terviklikke ahelaid — alates integreeritud võimenditest ja lõppvõimendusest kuni DAC-ide, võrgumängijate ja kõlariteni — rõhuga madalale mürale, täpsusele ja pikaajalisele töökindlusele.
Hi-Fi Market on T+A ametlik edasimüüja Eestis, pakkudes originaaltooteid koos tootja ametliku garantiiga ja kohaliku järeltoega. Aitame valida sobiva T+A suuna sinu ruumi ja kuulamisharjumuste järgi — kas “üks bränd / üks süsteem” lähenemine või T+A elektroonika sobitamine hoolikalt valitud kõlarite ja allikatega.
Tule meie Tabasalu esitlusalale (Tallinna lähedal), et kuulata valitud T+A komponente ja arutada päris elu seadistuse ning süsteemisobituse nüansse enne otsustamist.
Ehita stereo süsteem T+A-ga
T+A töötab eriti hästi siis, kui mõtled ahelale tervikuna: alusta integreeritud võimendist (või eel-/lõppvõimendusest), lisa vajadusel võrgumängija ja DAC, ning vali stereo kõlarid vastavalt ruumi suurusele ja kuulamiskaugusele.
Uuri sobivaid kategooriaid, et ehitada tasakaalustatud T+A põhine süsteem:
Kui soovid kiiret ja tasakaalustatud lühivalikut, võta meiega ühendust — soovitame kombinatsioone, mis sobivad sinu ruumi, eelarve ja uuendusplaaniga.
TASUTA KOHALETOIMETAMINE ÜLE EESTI (Tellimustele üle 100 €)
Eestisisesed saadetised jõuavad üldjuhul ostja määratud sihtkohta 3-5 tööpäeva jooksul alates müügilepingu jõustumisest. Leping jõustub alates tasumisele kuuluva summa laekumisest veebipoe pangaarvele.
Soovi korral võite ka kaubale ise järele tulla. Esindussalongi aadress on Kallaste 7, Tabasalu.
TARNIME KÕIKIDESSE EUROOPA LIIDU RIIKIDESSE.
Palun täitke kassas kõik väljad ning me võtame teiega ühendust seoses transpordikuludega. Palun tasuge alles pärast seda, kui oleme transpordikulud kinnitanud.
VEEBIPOE OMANIK
Veebipoe hifimarket.ee omanik on Audio Sommelier OÜ (registreerimis number 16891515), aadress Kallaste, 7, Tabasalu Keskus, Eesti 76901
