Musical Fidelity M5XI integreeritud võimendi
2290,00 €
Musical Fidelity M5xi on võimas kõrgklassi integreeritud võimendi, mis annab kuni 160 W kanali kohta 8 oomi ja 240 W 4 oomi juures. Selle täielikult diskreetne kahe monoploki põhimõttel töötav võimendiarhitektuur pärineb Musical Fidelity lipulaeva TITAN tehnoloogiast ning seda täiendavad MM/MC fonovõimendi, HDMI eARC, optilised ja koaksiaalsed digitaalsisendid, kuni 24-bit/192 kHz USB-C heli, kodukino bypass ja muutuv eelvõimendi väljund.
Musical Fidelity M5xi Integrated Amplifier
The Musical Fidelity M5xi is a high-performance integrated amplifier developed as a major evolution of the successful M5si. Its preamplifier, power amplifier, digital and phono sections have all been redesigned, bringing the M5xi considerably closer to the circuitry used in Musical Fidelity’s larger M6xi and the company’s reference TITAN amplifier.
160 Watts per Channel with High Current Capability
The M5xi delivers 160 watts per channel into 8 ohms and 240 watts per channel into 4 ohms at 1% THD, providing substantial reserves for driving a wide range of loudspeakers. Across the full 20 Hz–20 kHz audio bandwidth at 0.09% THD, output remains an impressive 140 watts per channel into 8 ohms and 210 watts into 4 ohms.
Peak current capability reaches 45 amps peak-to-peak, giving the amplifier the reserves required to maintain control when loudspeaker impedance falls or musical dynamics demand sudden bursts of power.
Amplifier Technology Derived from TITAN
The M5xi is internally configured around two independent power amplifier sections combined with a dedicated preamplifier stage. Its fully discrete power amplifier employs a low-distortion Darlington output stage using Musical Fidelity’s established circuit configuration.
The amplifier topology and PCB layout have been developed from technology used in the company’s TITAN and M6-series amplifiers. Careful optimisation of the circuit layout reduces electrical imbalance and minimises the amount of corrective feedback required.
Improved Power Supply and Internal Shielding
The main transformer and power supply PCB are enclosed within a metal shield to reduce electromagnetic interference inside the chassis. This provides a cleaner operating environment for the sensitive preamplifier, digital and phono circuits and is particularly beneficial to the high-gain moving-coil phono stage.
The digital and HDMI circuitry is physically separated onto dedicated boards with its own linear power supply, helping prevent high-frequency digital noise from interfering with the analogue amplifier stages.
MM and MC Phono Stage
The M5xi includes a newly developed phono stage supporting both moving-magnet and moving-coil cartridges. Compared with the MM-only stage of the previous M5si, the new design uses improved shielding, circuit layout and isolation to reduce noise and distortion.
Separate MM and MC gain settings allow the amplifier to work directly with a broad range of turntable cartridges without requiring an external phono preamplifier.
Modern Digital Connectivity
Digital connectivity has been substantially expanded. The M5xi provides optical and coaxial S/PDIF inputs together with a USB-C input supporting digital audio up to 24-bit/192kHz.
An HDMI eARC input allows a compatible television to be connected directly to the amplifier, making the M5xi suitable for systems where the same high-quality stereo loudspeakers are used for both music and television sound.
Dedicated USB Power for External Streamers
A 5V/2A USB-A output provides a dedicated power supply for compatible external network streamers and other low-power USB devices. The output uses its own transformer winding and linear power supply stage, allowing a compact streamer to be powered directly from the amplifier without an additional external power adapter.
Home Theatre Integration
A dedicated home theatre bypass allows the M5xi’s power amplifier section to drive the front left and right loudspeakers in a multi-channel system while volume control is handled by an AV receiver or processor.
The variable preamplifier output can also be used for bi-amplification, an external power amplifier or active subwoofer, while the fixed line output provides an additional connection for recording equipment or a dedicated headphone amplifier.
Precision Analogue Volume Control
The low-noise analogue preamplifier uses a high-quality Burr-Brown stepped attenuator. Compared with a conventional potentiometer, the stepped design provides more accurate channel matching, particularly at lower listening levels, helping maintain stable stereo imaging and balanced output between the left and right channels.
Built for Long-Term Hi-Fi Systems
The amplifier is housed in Musical Fidelity’s substantial all-metal construction with a heavy front panel machined from extruded aluminium. In addition to providing mechanical rigidity, the metal chassis acts as electromagnetic shielding for the internal circuitry.
With powerful analogue amplification, MM/MC vinyl playback, modern digital connectivity and flexible home cinema integration, the Musical Fidelity M5xi is designed as the central amplifier for a high-quality stereo system capable of accommodating both traditional and contemporary music sources.
Amplifier
- Type: Integrated stereo amplifier
- Amplifier design: Fully discrete transistor power amplifier
- Configuration: Two independent power amplifier sections with separate preamplifier
- Output stage: Low-distortion Darlington configuration
- Output devices: 2 pairs per channel
Power Output
- Continuous power, 8 ohms, 1 kHz, 1% THD: 160 W per channel
- Continuous power, 4 ohms, 1 kHz, 1% THD: 240 W per channel
- Continuous power, 8 ohms, 20 Hz–20 kHz, 0.09% THD: 140 W per channel
- Continuous power, 4 ohms, 20 Hz–20 kHz, 0.09% THD: 210 W per channel
- Peak power, 8 ohms, 1 kHz: 190 W per channel
- Peak power, 4 ohms, 1 kHz: 320 W per channel
- Output voltage: 36 V RMS
- Peak-to-peak voltage: 101 V
- Peak-to-peak current: 45 A
- Damping factor: 47 at 8 ohms
Line Input Performance
- THD+N: <0.009% typical, 20 Hz–20 kHz
- Signal-to-noise ratio: >105 dB A-weighted
- Input impedance: 40 kOhms
- Frequency response: +0 / –0.1 dB, 10 Hz–20 kHz
Analogue Inputs
- Line-level inputs: 4 × stereo RCA
- Phono input: 1 × MM/MC
- Home theatre bypass: Yes
Digital Inputs
- HDMI: 1 × HDMI eARC
- Coaxial: 1
- Optical: 1
- USB: 1 × USB-C
- Maximum USB resolution: 24-bit / 192 kHz
Phono Stage
- Cartridge compatibility: MM and MC
- Input sensitivity: 3 mV MM / 0.4 mV MC
- Gain: 40 dB MM / 60 dB MC
- Signal-to-noise ratio: >87 dB A-weighted
- Input capacitance: 220 pF
- Input impedance: 50 kOhms MM / 1 kOhm MC
- Frequency response: RIAA/IEC ±0.4 dB, 20 Hz–20 kHz
Outputs
- Fixed line output: 1 × stereo RCA
- Variable preamplifier output: 1 × stereo RCA
- Speaker outputs: 2 pairs of 4 mm binding posts
- USB power output: USB-A, 5 V / 2 A
Control and Integration
- RS232: 1 × D-sub
- Trigger input: Yes
- Trigger output: Yes
- Remote control: Included
Power
- Mains voltage: 115/230 V AC, 50/60 Hz
- Alternative mains version: 100 V AC, 50/60 Hz
- Maximum power consumption: 320 W
Dimensions and Weight
- Dimensions (W × H × D): 440 × 125 × 405 mm
- Weight: 15 kg
- Packed weight: 18.5 kg
Musical Fidelity on Briti hi-fi bränd, mis on tuntud jõulise ja muusikaliselt veenva võimenduse poolest ning “küpsest” insenerilähenemisest: tugevad toiteplokid, stabiilne kontroll ja heli, mis püsib nauditav ka pikkadel kuulamissessioonidel. Musical Fidelity Eesti kuulajatele tähendab see eelkõige kindlat sooritust ilma hype’i tagaajamata.
Hi-Fi Market on Musical Fidelity ametlik edasimüüja Eestis — pakume originaaltooteid koos tootja ametliku garantiiga ja kohaliku järeltoega. Aitame valida sobiva Musical Fidelity komponendi vastavalt sinu kõlaritele, ruumi suurusele ja kuulamisharjumustele — olgu eesmärgiks puhas integraalvõimendil põhinev lahendus või eel-/lõppvõimendite kombinatsioon suurema varu ja kontrolli jaoks.
Ootame sind meie Tabasalu esitlusalale (Tallinna lähedal), et arutada päris elu süsteemisobitust ja kuulata valitud Musical Fidelity komponente enne ostu.
Stereo-süsteemi ülesehitus Musical Fidelityga
Musical Fidelity valitakse sageli koherentse stereosüsteemi “südameks”. Alusta integraalvõimendist, et saada lihtne ja võimas vundament — või liigu eelvõimendi + lõppvõimendi kombinatsioonile, kui soovid rohkem skaalat, kontrolli ja paindlikkust uuendusteks. Hea DAC võib lisada detailsust ja ajastust, hoides esituse loomuliku ja väsimusvaba.
Uuri sobivaid kategooriaid, et ehitada tasakaalustatud Musical Fidelity põhine süsteem:
Kui soovid kiiret, hästi sobitatud soovitust, võta meiega ühendust — pakume Musical Fidelity lahenduse, mis sobib sinu ruumi, eelarve ja helieelistustega.
TASUTA KOHALETOIMETAMINE ÜLE EESTI (Tellimustele üle 100 €)
Eestisisesed saadetised jõuavad üldjuhul ostja määratud sihtkohta 3-5 tööpäeva jooksul alates müügilepingu jõustumisest. Leping jõustub alates tasumisele kuuluva summa laekumisest veebipoe pangaarvele.
Soovi korral võite ka kaubale ise järele tulla. Esindussalongi aadress on Kallaste 7, Tabasalu.
TARNIME KÕIKIDESSE EUROOPA LIIDU RIIKIDESSE.
Palun täitke kassas kõik väljad ning me võtame teiega ühendust seoses transpordikuludega. Palun tasuge alles pärast seda, kui oleme transpordikulud kinnitanud.
VEEBIPOE OMANIK
Veebipoe hifimarket.ee omanik on Audio Sommelier OÜ (registreerimis number 16891515), aadress Kallaste, 7, Tabasalu Keskus, Eesti 76901
