NAD CI 8-150 DSP Multi-Zone Power Amplifier

4599,00 €

The CI8-150 is our flagship CI amplifier. Powerful and refined, with 150 watts per channel of audiophile grade amplification, this distribution amplifier will drive anything you need it to without breaking sweat, and it will do it with class leading performance. NAD CI amplifiers will redefine the way you view distributed audio systems.

Lisa soovinimekirja

Kirjeldus

Full Disclosure Power

The CI 8-150 DSP offers NAD’s Masters Series performance in the rack space. As per NAD’s Full Disclosure Power (FDP) ratings, this sophisticated amp is capable of delivering a conservative 150 watts per channel at 8 ohms into all channels simultaneously, bridgeable to 280 watts per channel. IHF Dynamic Power in bridged mode is 4 x 670 watts per channel at 4 ohms. No matter what you throw at the CI 8-150, it won’t flinch.

Hybrid Digital Amplification

The CI 8-150 DSP is designed to deliver uncompromised performance within the custom environment. With its nCore output stage, the CI 8-150 DSP shares the same pedigree as some of NAD’s prestigious Masters Series amplifiers. What makes this amplifier unique is its ability to deliver a level of detail and refinement unmatched by any distribution amplifier on the market today. Being load invariant, the CI 8-150 is as comfortable driving a 4 ohm load as it does anis 8 ohm. The THD and noise floors are beyond what you’d expect from a CI amplifier, meaning that the dynamic range and linearity of this amplifier wouldn’t be out of place in a hi- fi set up.

Rack Space Efficiency and Reliability

NAD is keenly aware that reliability is paramount for a professional installer, so all models will be based on tried and true amplification platforms delivering stable and reliable performance. Since rack real estate is always at a premium, NAD CI amps have been designed to take up as little room as possible. Thermostatic fans draw in cool air from the front of the unit and out through the rear vents, meaning you don’t need to leave ventilation gaps between each unit for them to stay cool.

Web UI/DSP

The CI 8-150 DSP is network ready for simple set up, via the custom WebUI. This allows fast set up , of inputs & outputs, setting gain, stereo/mono and bridging of channels, creation of DSP profiles using the 5 band parametric EQ, plus high and low pass filters to allow the dialing in of the audio in each zone for optimal performance. A variety of power on methods are available as well as an Eco mode setting for minimal power consumption. I/O switching and routing can also be managed via compatible control systems with drivers available for Crestron, Control4, Elan, RTI and URC.

SPECIFICATIONS

Continuous output power into 8 ohms:	150 W (ref. 20 Hz-20 kHz at rated THD – all channels driven), 180 W (ref. 20 Hz-20 kHz at rated THD – two channels driven)
Continuous output power into 4 ohms:	180 W (ref. 20 Hz-20 kHz at rated THD – all channels driven), 300W (ref. 20 Hz-20 kHz at rated THD – two channels driven)
Continuous output power into 8 ohms at Bridged mode:	280 W (ref. 20 Hz-20 kHz 0.02% THD – all channels driven), 500 W (ref. 20 Hz-20 kHz 0.02% THD – two channels driven)
THD (20 Hz – 20 kHz):	0.02% (1 W to 120 W, 8 ohms and 4 ohms)
Signal-to-Noise Ratio:	90 dB (A-weighted, 500 mV input, ref. 1 W out in 8 ohms)
Clipping power (All channels driven):	160W (1kHz8ohms 0.1%THD), 200W (1kHz4ohms 0.1%THD)
Clipping power into 8 ohms at Bridged mode:	300 W (1 kHz 0.1 % THD – all channels driven), 550 W (1 kHz 0.1 % THD – two channels driven)
IHF Dynamic Power (all channels driven) – 8 Ohms:	180W
IHF Dynamic Power (all channels driven) – 4 Ohms:	280W
IHF Dynamic Power (two channels driven) – 8 Ohms:	200W
IHF Dynamic Power (two channels driven) – 4 Ohms:	360W
IHF Dynamic Power (Bridged mode, All channels driven) – 8 Ohms:	520W
IHF Dynamic Power (Bridged mode, All channels driven) – 4 Ohms:	670W
IHF Dynamic Power (Bridged mode, Two channels driven) – 8 Ohms:	600W
IHF Dynamic Power (Bridged mode, Two channels driven) – 4 Ohms:	800W
Peak output current:	26A (1ohm, 1ms)
Damping Factor:	150 (ref. 8 ohms, 20 Hz to 6.5 kHz)
Frequency Response:	±0.5dB (20Hz-20kHz)
Channel Seperation:	75 dB (1 kHz), 65 dB (10 kHz)
Maximum undistorted input level:	3300 mV
Input sensitivity (for 150 W in 8 ohms, maximum volume):	1450 mV
Analog Input audio sense threshold (one channel with signal):	3 ± 0.5 mVrms (ref. 100 Hz – 10 kHz)
Trigger IN level:	3-30Vdc
Standby power:	0.5 W
*Gross dimensions (W x H x D):**	483x90x435mm (19 1/16 x 3 9/16 x 17 3/16 inches)
Shipping Weight:	17.6 kg (38.8 lbs)

About NAD

History In 1972, a new kind of audio company was born. NAD took form when a large group of audio-industry importers in Europe, all music lovers, set out to develop products that cut through the industry hype. The goal of NAD was to prove that excellent sound quality and excellent value could exist together. It was a formidable goal – some of the most reputable electronics brands of the time were unaffordable to most, while the affordable spectrum of the market was dominated by poor quality imports from global electronics giants. NAD’s founders remained undeterred and their original vision led to an inspiring story of how a group of specialty audio mavericks took on the Goliaths of the audio industry to carve out a unique place of their own.

Kättesaamine ja kohaletoimetamine

TASUTA KOHALETOIMETAMINE ÜLE EESTI (Tellimustele üle 100 €)

Eestisisesed saadetised jõuavad üldjuhul ostja määratud sihtkohta 3-5 tööpäeva jooksul alates müügilepingu jõustumisest. Leping jõustub alates tasumisele kuuluva summa laekumisest veebipoe pangaarvele.

Soovi korral võib ka ise kaubale järele tulla. Salongi aadress on Kallaste 7, Tabasalu.

TARNIME KÕIKIDESSE EUROOPA LIIDU RIIKIDESSE.

Palun täitke kassas kõik väljad ja me võtame teiega ühendust saatmiskulude osas. Palun tehke makse alles pärast saatmiskulude kinnitamist.

VEEBIPOE OMANIK

Veebipoe hifimarket.ee omanik on Audio Sommelier OÜ (registreerimis number 16891515), aadress Kallaste, 7, Tabasalu Keskus, Eesti 76901