Eversolo DAC-Z10 Desktop DAC & Headphone Amplifier
1979,00 €
The DAC-Z10 is built on Eversolo’s Fully Isolated Architecture (FIA), which completely separates the digital and analog domains to minimize interference and preserve signal purity. Three independent linear power supplies individually power the left channel, system, and right channel, allowing each to operate in an ultra-low-noise environment. Its decoding architecture features two sets of AK4191 + AK4499 DACs for independent left and right channels, combined with a fully balanced analog preamplifier that employs precise dual-channel R2R volume control.
Three Independent Power Supplies
With three independent toroidal transformers for left channel, right channel, and system power, the DAC-Z10 maintains ultra-low noise down to 42μV. This design minimizes interference, giving each channel its own clean, isolated voltage support for a stable and detailed sound.
Dual Decoding Modules
Built on a fully balanced architecture, the DAC-Z10 features dual independent AK4191 + AK4499 DAC modules for the left and right channels. Combined with AKM’s Velvet Sound™ technology, it strikes the perfect balance between precision and tonal richness.
R2R Volume Control
The DAC-Z10 employs a precise R2R resistor array for volume control, preserving the original signal at every level. From quiet listening to full volume, every nuance remains intact, delivering clean, accurate, and faithful sound.
Fully Balanced Preamplifier
The DAC-Z10 features a high-performance fully balanced preamplifier, supporting both XLR and RCA analog inputs with up to +10dB gain. Paired with a precision R2R analog volume control network, it delivers ultra-low noise and distortion, significantly enhancing dynamic range and signal integrity, allowing every nuance of the music to be reproduced with clarity and authenticity.
Phase-Locked Loop Technology
The DAC-Z10 integrates an OCXO temperature-controlled crystal oscillator and PLL (Phase-Locked Loop) technology to achieve precise clock reconstruction. Accurate timing is fundamental to high-resolution audio reproduction, and with the stability of the OCXO and the precision of PLL correction, the DAC-Z10 ensures that every note is delivered exactly as intended.
External Clock Support
Accurate timing is key to capturing every musical nuance. By supporting external high-precision clock, the DAC-Z10 takes clock stability and accuracy to the next level.
FPGA Redefined
The DAC-Z10 features a built-in FPGA that shapes IIS data and refines the clock. Every digital signal is thus optimized to its purest form before reaching the DAC – you can truly hear the difference.
| Display: | 8.8" IPS |
| Chassis Material: | Aluminium alloy |
| Main Processor: | DCP8568 |
| DAC: | Left Channel: AK4191 + AK4499, Right Channel: AK4191 + AK4499 |
| Audio Processor: | Multi-core USB audio processor |
| OPA Chip: | OPA1612 |
| Power: | Triple ultra-low noise linear power supplies |
| Bluetooth Audio Input: | Qualcomm QCC5125 Bluetooth module, Bluetooth version: BT5.0; supports SBC/AAC Bluetooth audio protocols |
| USB-B Audio Input: | Compatible with Windows 10 and above, macOS, Android, and iOS; supports up to Stereo DSD512 / PCM 768kHz 32Bit |
| IIS Input: | Supports 8 mode configurations, up to Stereo DSD512 / PCM 768kHz 32Bit |
| AES/EBU Input: | Up to Stereo PCM 192KHz/24Bit / DSD64 DoP |
| Optical Audio Inputs *2: | Up to Stereo PCM 192KHz/24Bit / DSD64 DoP |
| Coaxial Audio Inputs *2: | Up to Stereo PCM 192KHz/24Bit / DSD64 DoP |
| ARC Input: | Up to Stereo PCM 192KHz/24Bit |
| Analog Audio Inputs: | XLR (Balanced), RCA |
| Pre-out: | Pre-out: XLR (Balanced), RCA; Headphone out: 6.35mm single-ended |
| External Clock Input: | Supports 10M/25M clock inputs with 50Ω or 75Ω impedance |
| Recommended Headphone Impedance: | 16–300Ω (Low Gain: 16–32Ω / High Gain: 32–300Ω) |
| Power Supply: | AC 100~240V 50/60Hz |
| USB Ports: | USB2.0*1（only for firmware upgrade） |
| Control Methods: | Touchscreen control, remote control, mobile App control |
| Rated Power Consumption: | 32W |
| Dimensions: | 265mm (L) × 310mm (W) × 78mm (H) |
Eversolo is a modern digital audio brand focused on high-performance network players, streamers and digital source components. The brand is known for combining advanced software platforms, fast user interfaces and solid audio engineering in compact, well-priced devices.
Eversolo products are designed for listeners who want a flexible streaming solution with broad format support, stable apps and clean digital sound — without unnecessary complexity. This makes Eversolo a practical choice for both stereo systems and modern streaming-based setups.
At Hi-Fi Market, we help integrate Eversolo components into balanced systems, matching them with appropriate amplification and speakers depending on your listening habits and room size.
Using Eversolo as a Digital Source
Eversolo players are typically used as the digital heart of a system — handling streaming, local playback and digital outputs to DACs or amplifiers. They work equally well in compact stereo setups and more advanced hi-fi systems.
Explore compatible categories for an Eversolo-based system:
If you want a simple and reliable streaming-based system, contact us — we’ll help you choose the right Eversolo setup.
FREE DELIVERY ACROSS ESTONIA (For orders over €100)
Shipments within Estonia generally arrive at the destination specified by the buyer within 3-5 business days from the entry into force of the sales contract. The contract enters into force from the moment the amount due is received into the online store's bank account.
If you wish, you can also pick up the goods yourself. The address of the salon is Kallaste 7, Tabasalu.
WE DELIVER TO ALL COUNTRIES OF THE EUROPEAN UNION.
Please fill in all fields at the checkout and we will contact you regarding shipping costs. Please make payment only after confirming the shipping costs.
OWNER OF THE ONLINE STORE
The owner of the online store hifimarket.ee is Audio Sommelier OÜ (registration number 16891515), address Kallaste, 7, Tabasalu Keskus, Estonia 76901
