McIntosh PS2K Powered Subwoofer
69990,00 €
The McIntosh PS2K Powered Subwoofer delivers exceptionally deep, controlled bass for reference-level stereo and home cinema systems. Four 13-inch woofers are each powered by a dedicated 500-watt Class D amplifier, providing up to 2,000 watts of total power. Adjustable crossover, phase and parametric EQ controls allow precise integration with the loudspeakers and listening room.
A SUBWOOFER WITH OVER-THE-TOP PERFORMANCE
Experience unparalleled bass performance with the McIntosh PS2K Powered Subwoofer. Crafted with meticulous precision and a profound passion for sound, the breathtaking PS2K is designed to elevate the listening experience of an already awe-inspiring home audio system by adding new depths of low frequency perfection.
BIG POWERFUL WOOFERS
The PS2K subwoofer leaves no room for compromise. Four 13″ woofers, or drivers, with massive magnets are the heart and soul of the PS2K. They utilize our patented Low Distortion High Performance (LD/HP®) Magnetic Circuit Design, which significantly reduces distortion while increasing the driver’s power handling and efficiency.
Finite Element Analysis (FEA) played a pivotal role in optimizing the drivers’ performance, ensuring a sound experience that is simply breathtaking. The drivers have been developed with extreme linearity in order to reduce distortion. The voice coil is extra long, while the suspension is specially designed with a long excursion to give longer linear capability than most drivers.
MULTI-LAYER CARBON FIBER CONES
Witness a new pinnacle in craftsmanship with the PS2K’s innovative multi-layer carbon fiber cones. The cones have an integrated formed joint with the voice coil, resulting in extreme rigidity and high power handling capability. While there have been carbon fiber cones available in the past, they were typically made from a single layer of carbon fiber and could still flex quite a bit, which could negatively impact sound performance. We leave no room for acoustic compromises, so the multi-layer cones in the PS2K’s drivers are very strong and can resist long, extended excursion travel without any unwanted flexing.
RAW POWER
Feel the passion in your favorite songs and movies as the PS2K’s four woofers, each driven by a dedicated 500 Watt Class D amplifier, unite to unleash a total power output of up to 2,000 Watts. The amplifiers are meticulously calibrated to minimize distortion and produce clear, tight bass with astonishingly low distortion in even the most expansive listening spaces.
The woofers are stacked atop the amplifier module, which features a power output meter that shows the total output of the PS2K. The enclosure baffle is nearly 1-1/2″ (3.8cm) thick to ensure ultimate rigidity and low vibration, and has a sealed box design to eliminate any potential port noises.
BIG PERFORMANCE FOR ALL
The PS2K is designed to effortlessly keep up with the output levels that can be obtained with our Reference Two-Channel and Reference Home Theater systems. These systems are powered by our 2,000 Watt tri-chassis MC2.1KW monoblock amplifiers and feature our large XRT2.1K and XRT1.1K speakers (or the previous generation XRT2K and XRT1K speakers); the PS2K will be a perfect match both sonically and visually with these McIntosh speakers.
With a sleek design that bridges the gap between power and finesse, the PS2K is also the perfect complement to high-output loudspeakers from other manufacturers. With its robust power capabilities, the PS2K subwoofer will not “run out of steam” at the high volume levels achievable from the main speakers in any high-end home audio or home theater system.
SEAMLESS INTEGRATION AND ADJUSTABILITY
The PS2K is not only a powerhouse in performance but also a master of versatility. Whether you have a two-channel stereo system or a multi-channel home theater setup, the PS2K offers balanced stereo inputs and outputs, as well as balanced and unbalanced subwoofer inputs and outputs. This variety of connection options will satisfy virtually all installations. Daisy-chaining capabilities are in place so that more than one PS2K can be used in a system.
Once connected to your amplifier, integrated amplifier, or home theater processor, a variety of built-in filtering controls makes it so you can precisely tailor the PS2K to your listening preferences. Adjustable Low Pass and High Pass filters let you set the crossover frequency. Two fully adjustable parametric EQ filters help compensate for unwanted effects caused by the room, furniture, or loudspeaker placement. Finally, Level Control and Phase adjustment knobs allow you to harmoniously blend the PS2K’s acoustic output with your existing audio system.
ELECTRONIC SPECIFICATIONS
-
- Impedance Nominal
- 8 Ohms
-
- Power Output
- 2KW (Four 500W, one per woofer)
Maximum Output > 120 dB
-
- Frequency Response
- 20Hz - 500Hz with LFE
20Hz - 100Hz without LFE
-
- Filter Frequencies
- High Pass: 40Hz - 100Hz
Low Pass: 40Hz - 100Hz
Phase: Continuously Variable
Parametric: Two band 30Hz - 100Hz, variable bandwidth and level +/- 8dB
-
- Input Sensitivity
- 1V Balanced
500mV Unbalanced (0.5V)
-
- Total Harmonic Distortion
- Amplifier: 0.05%
Preamplifier (rear panel outputs): 0.005%
-
- Voltage Gain
- Amplifier: 31dB
Preamplifier: 10dB
-
- Signal To Noise Ratio
- Amplifier: 115dB A Weighted
Preamplifier: 100dB A Weighted
-
- Input Impedance
- 20K Ohms Balanced
10K Ohms Unbalanced
-
- Maximum Input Signal
- 9V Balanced
4.5V Unbalanced
DRIVER SPECIFICATIONS
-
- Number of Woofers
- 4
-
- Woofer Size
- 13"
-
- Woofer Type
- Carbon Fiber with extra long excursion and Low Distortion High Performance (LD/HP®) Magnetic Circuit Design
CONNECTIVITY
-
- Balanced Input
- 1 Pair Stereo
1 Subwoofer (mono)
-
- Unbalanced Input
- 1 Subwoofer (mono)
-
- Balanced Output
- 1 Pair Stereo
1 Subwoofer (mono)
-
- Unbalanced Output
- 1 Subwoofer (mono)
GENERAL SPECIFICATIONS
-
- Enclosure Finish
- Highly polished Piano Black
-
- Metal Finish
- Anodized aluminum base
High Durable powder coated plate surfaces
WEIGHTS & DIMENSIONS
-
- Unit Dimensions (W x H x D)
- 19-1/4” (48.9cm) x 78-5/8” (199.7 cm) x 22-1/2” (57.2cm)
Base footprint: 25-5/16" (64.3cm) x 28-7/16" (21.43cm)
-
- Unit Weight
- 458 lbs (207.7kg)
-
- Shipping Weight
- 932 lbs (422.7kg)
McIntosh is an iconic American audio brand known worldwide for reference-grade amplification, unmistakable industrial design, and decades of engineering heritage. From classic tube circuits to modern solid-state power, McIntosh components are built for long-term ownership and for systems that sound authoritative, controlled and effortlessly musical.
Hi-Fi Market is an authorised McIntosh dealer in Estonia, supplying genuine products through official distribution channels with manufacturer warranty and local after-sales support. We help you choose the right McIntosh direction for your room and listening habits — whether you’re building around an integrated amplifier, moving to preamplifier + power amplifier separates, or refining sources and cabling to get the last layer of resolution and tonal balance.
Visit our showroom near Tallinn (Tabasalu) to discuss real-world system matching and hear selected McIntosh components in a calm, focused setup before you commit.
Build a Reference Stereo System with McIntosh
McIntosh is most often chosen as the heart of a serious two-channel system. Start with an integrated amplifier for a clean, powerful foundation, or step up to separates (preamplifier + power amplifier) for maximum scale and control. Then complete the chain with sources that match how you listen — streaming and digital playback, or a vinyl front end with a proper phono stage. We’ll help you keep the system coherent in a real room and choose a path that makes long-term sense.
Explore compatible categories to build a balanced McIntosh-based system:
– Integrated Amplifiers
– Preamplifiers
– Power Amplifiers
– Network Players / Streamers
– DACs (Digital-to-Analog Converters)
– Phono PreamplifiersIf you want a short, well-matched shortlist, contact us — we’ll recommend a McIntosh system path that fits your room, music preferences, budget, and upgrade plan.
FREE DELIVERY ACROSS ESTONIA (For orders over €100)
Shipments within Estonia generally arrive at the destination specified by the buyer within 3-5 business days from the entry into force of the sales contract. The contract enters into force from the moment the amount due is received into the online store's bank account.
If you wish, you can also pick up the goods yourself. The address of the salon is Kallaste 7, Tabasalu.
WE DELIVER TO ALL COUNTRIES OF THE EUROPEAN UNION.
Please fill in all fields at the checkout and we will contact you regarding shipping costs. Please make payment only after confirming the shipping costs.
OWNER OF THE ONLINE STORE
The owner of the online store hifimarket.ee is Audio Sommelier OÜ (registration number 16891515), address Kallaste, 7, Tabasalu Keskus, Estonia 76901
