McIntosh XR100 Floorstanding Speaker
6799,00 €
The XR100 floorstanding speaker is sleek and contemporary in appearance while producing full range audio reproduction typical of much larger cabinet designs. The magnetically attached grille is acoustically transparent and covered with neutral black cloth. Our patented Solid Cinch speaker binding posts easily but securely attach the speaker cables to prevent them from coming loose and possibly causing a short; the binding posts are gold-plated to prevent corrosion and ensure a quality signal is delivered to your speakers.
Woofers with Patented LD/HP Technology
The McIntosh Low Frequency Loudspeaker Elements feature the patented LD/HP Magnetic Circuit Design. This design, when compared to conventional Loudspeaker Drivers, reduces distortion significantly. It also increases power handling and efficiency. The rear vent through the magnetic assembly offers improved heat dissipation. The die cast basket has an open air area under the voice coil/spider assembly to prevent displacement noise. The polypropylene cone with a rubber surround has a four layer copper voice coil and is rigid to perform as a near perfect air piston. All together these advances in woofer design construction and materials produce the very important first several octaves of music, with a high degree of accuracy and superb transient response. This performance level rivals woofers twice the size of the XR100 woofer.
Neodymium-Iron-Boron Alloy Magnets
The 10 two inch Midrange Drivers and the three-quarter inch Dome Super Tweeter all use this Alloy. The Neodymium-Iron-Boron Alloy has the highest flux density per unit of volume. This allows for a smaller physical size driver and thus closer driver to driver placement for improved dispersion.
Dual Midrange Crossover Points
There are several benefits when using multiple Midrange drivers. First, there is a substantial increase in power handling capacity far greater than a single larger diameter midrange driver. Second, due to mutual acoustic coupling there is an increase in output volume while at the same time a reduction in audible distortion. Eight of the 10 Midrange Drivers reproduce the lower two octaves of midrange frequencies. The remaining two Midrange Drivers reproduce the upper two octaves of midrange frequencies and are located directly adjacent to the tweeter. This maintains wide dispersion with a stable sound image throughout the upper midrange frequencies.
Low Harmonic and Intermodulation Distortion
The XR100 Loudspeaker System is capable of reproducing the full dynamic range of a symphony orchestra with very low audible distortion of any kind.
Low Frequency Port
The XR100 Loudspeaker System utilizes a vertical port with a rear opening to increase bass output, reduce distortion and improve the overall efficiency of the Loudspeaker.
High Power Handling
The Loudspeaker Elements and Crossover Components of the XR100 are all chosen for use with amplifiers up to 600 watts, yet can be driven with a 75 watt amplifier.
Loudspeaker Protection
The XR100’s built-in speaker protection incorporates four automatic resetting solid-state devices in the crossover network. One protects the tweeters, one each for the low and upper midrange drivers and one for the woofers.
Superior Imaging
Locating the Super Tweeter between the multiple Midrange drivers generates a symmetrical polar response for superior imaging. The Midrange and Super Tweeter Drivers are precisely aligned on the precision machined mounting plate of 5/8 inch thick aluminium with a Brushed Champagne Gold Finish.
| Impedance Nominal: | 8 Ohms |
| Power Rating: | 75 to 600 Watts |
| Frequency Response: | 30Hz to 45kHz |
| Sound Pressure Level, 2.8V/1m: | 87dB |
| Crossover | 300Hz, 2kHz, 8kHz |
| Number of Woofers: | 4 |
| Woofer Size: | 6" |
| Woofer Type: | Cast Frame, LD/HP®, Poly Cone |
| Number of Midranges: | 10 |
| Midrange Size: | 2" |
| Midrange Type: | 8 Inverted Titanium Dome Midranges covering 300Hz to 2kHz, and 2 Inverted Titanium Dome Midrange-Tweeters covering 2kHz to 8kHz |
| Number of Tweeters: | 1 |
| Tweeter Size: | 3/4" |
| Tweeter Type: | Titanium Dome |
| System Type: | Ported 4-Way Floor Standing |
| Grille: | Black knit cloth, magnetically attached |
| Available Finishes: | Red Walnut, Black |
| Unit Dimensions (W x H x D): | 8" (20.3cm) x 51" (129.5cm) x 18-1/2" (46.9cm) (including cables and connectors) |
| Unit Weight: | 68.5 lbs (31.1 kg) |
| Shipping Weight: | 83 lbs (37.6 kg) |
McIntosh is an iconic American audio brand known worldwide for reference-grade amplification, unmistakable industrial design, and decades of engineering heritage. From classic tube circuits to modern solid-state power, McIntosh components are built for long-term ownership and for systems that sound authoritative, controlled and effortlessly musical.
Hi-Fi Market is an authorised McIntosh dealer in Estonia, supplying genuine products through official distribution channels with manufacturer warranty and local after-sales support. We help you choose the right McIntosh direction for your room and listening habits — whether you’re building around an integrated amplifier, moving to preamplifier + power amplifier separates, or refining sources and cabling to get the last layer of resolution and tonal balance.
Visit our showroom near Tallinn (Tabasalu) to discuss real-world system matching and hear selected McIntosh components in a calm, focused setup before you commit.
Build a Reference Stereo System with McIntosh
McIntosh is most often chosen as the heart of a serious two-channel system. Start with an integrated amplifier for a clean, powerful foundation, or step up to separates (preamplifier + power amplifier) for maximum scale and control. Then complete the chain with sources that match how you listen — streaming and digital playback, or a vinyl front end with a proper phono stage. We’ll help you keep the system coherent in a real room and choose a path that makes long-term sense.
Explore compatible categories to build a balanced McIntosh-based system:
– Integrated Amplifiers
– Preamplifiers
– Power Amplifiers
– Network Players / Streamers
– DACs (Digital-to-Analog Converters)
– Phono PreamplifiersIf you want a short, well-matched shortlist, contact us — we’ll recommend a McIntosh system path that fits your room, music preferences, budget, and upgrade plan.
FREE DELIVERY ACROSS ESTONIA (For orders over €100)
Shipments within Estonia generally arrive at the destination specified by the buyer within 3-5 business days from the entry into force of the sales contract. The contract enters into force from the moment the amount due is received into the online store's bank account.
If you wish, you can also pick up the goods yourself. The address of the salon is Kallaste 7, Tabasalu.
WE DELIVER TO ALL COUNTRIES OF THE EUROPEAN UNION.
Please fill in all fields at the checkout and we will contact you regarding shipping costs. Please make payment only after confirming the shipping costs.
OWNER OF THE ONLINE STORE
The owner of the online store hifimarket.ee is Audio Sommelier OÜ (registration number 16891515), address Kallaste, 7, Tabasalu Keskus, Estonia 76901
